Our Clients
Jinan MT Machinery, maker of Meiteng twin-screw extruders in Shandong, China, has delivered 1,000+ production lines to 60+ countries. Snack plants and pellet producers explain what changed on their floors.
Market Coverage
Meiteng 3D food and frying lines ship from Shandong, China, to main markets in South Asia, Southeast Asia, the Middle East, Africa and Latin America. Each project is planned around local voltage, heat source and raw material.
India, Bangladesh, Pakistan
Indonesia, Vietnam, Thailand
United Arab Emirates, Saudi Arabia
Nigeria
Brazil, Mexico
Client Answers
Meiteng clients fixed pellet cracking, high oil content, slow shape changes and raw material mismatch by matching each line section to the product. Plant managers report the results below.
Dry in stages, so the pellet loses moisture evenly before it goes to the warehouse.
“Drying was our biggest loss - pellets cracked after two weeks in the warehouse. With the multi-stage dryer, breakage dropped to almost none.”
Add a de-oiling section directly after the fryer and before seasoning.
“Potato and cassava based chips at six points lower oil content than our old fryer line, thanks to the de-oiling section.”
Yes. Change the die set instead of building a separate mould for every shape.
“Papad and 3D pellets in different shapes without a mould per shape. Dies swap in 20 minutes and the shape stays crisp after frying.”
“Over 200 shapes from the die set, and the 3D pellet keeps its shape through frying without curling.”
Yes. Lines run on potato, cassava or wheat, and you can test your own raw material at our factory.
“They configured the line around our local cassava flour, not a generic recipe, and expansion is even across the whole belt.”
Complete Line Stories
Buying every section from one manufacturer keeps mixing, extrusion, drying, frying, de-oiling, seasoning and packaging aligned. Two owners show how that protected their investment as output and product range grew.
Single machine first, full line later
“We bought a single machine first and later added the fryer and seasoning from the same factory, so every section lines up.”
A free process plan with CAD and 3D workshop layout shows how later sections will connect before you buy the first one.
2D pellets plus fried chips
“Starch-based 2D pellets were our only product; now we also run fried chips on the same line. One investment instead of two.”
Output, dies, screw combination, heating method and recipe are configured to the product mix you plan to sell.
View 3D Food and Frying Chips MachinesAt the Factory
Clients can visit our 20,000 m² Shandong plant, run trials with their own raw material and arrange third-party inspection. Every line completes a full trial run before leaving the factory.
On-Site Commissioning
Meiteng engineers travel to your plant to install and commission the line, then train the people who will run it. Your team takes over a working line.
Plan Your Line Installation“Their engineer came for commissioning, trained our staff and left only after the line hit the agreed output.”
The complete line runs in our test workshop before shipment. Third-party inspection can be arranged.
Export wooden cases with rust and moisture protection, shipped with full customs documents.
Engineers install each section at your plant and commission the line from mixing to packaging.
Your operators learn to run the PLC/MCC controls and the line on your own floor.
Long-Term Use
Every Meiteng line carries a 12-month warranty, spare parts at cost price with priority shipping, parts supply for 10+ years and lifetime remote support. One chief engineer reports on year two.
12months
Coverage starts with a line already proven in a full factory trial.
Year 2
“Two years later the die and screw are still in tolerance, and spare dies arrive at cost within a week.”
10+years
Parts ship at cost price with priority, so a worn component does not stop production for long.
Lifetime
Reach engineers by video, WhatsApp or email. Preventive maintenance, emergency repair and staff training are available.
Customs Feedback
Meiteng lines ship with CE documents and food-grade stainless steel on material-contact parts, so importers can present a complete file at customs.
“Food-grade stainless and CE paperwork were in order, so customs clearance took days, not weeks.”
Ways to Work Together
Jinan MT Machinery works with 30+ OEM partners and builds Meiteng extruders and complete lines in its own factory. Equipment distributors and snack brand owners get direct manufacturing support.
Your Project
Tell us your product, output, raw material, local voltage and heat source. You receive a free process plan, CAD and 3D workshop layout, and an itemized technical quotation, with a reply within 24 hours.