Potato
- End product: fried potato chips and snacks.
- We tune: recipe and screw combination.
- You check: crisp bite and oil level after de-oiling.
One factory builds your 3D food machine line, from raw material to packed papad, pellets and fried chips.
Jinan MT Machinery supplies snack factories and pellet producers with complete 2D/3D pellet and frying chips lines, built and trial-run in our own plant in Shandong, China.
- Line sections, one factory
- 9
- Itemised technical quote
- 24 hours
- Common standard models, in stock
- 10 days
- Certified
- CE · ISO 9001:2015
Complete production line
Nine sections, matched in one factory
Every section of a Meiteng line is designed and built under one roof, so capacity and connections match from mixer to packing machine. Start with one machine or order the turnkey line.
01
Mixing
Potato, cassava or wheat blended to your recipe.
02
Extrusion
MT75 co-rotating twin-screw extruder with PLC/MCC control.
03
Sheet forming
Dies set the 2D or 3D pellet shape.
04
Cutting
Formed sheet cut to your pellet size.
05
Drying
Multi-stage drying protects pellets from cracking in storage.
06
Frying
Even expansion across the belt.
07
De-oiling
A dedicated section lowers oil content after the fryer.
08
Seasoning
Flavour applied in line, straight after de-oiling.
09
Packing
Finished snacks leave the line ready to pack.
Shape changeover
More shapes from one papad and pellet line
A Meiteng line changes product by changing the die and screw setup, so you add shapes without adding a line.
Die design
- In-house die design for 2D and 3D pellets.
- Papad and 3D pellets on the same line.
- Spare dies ship at cost, with priority dispatch.
"Papad and 3D pellets in different shapes without a mould per shape. Dies swap in 20 minutes and the shape stays crisp after frying."
Screw combination
- MT75 co-rotating twin-screw extruder as the core model.
- Screw combination set to your raw material and recipe.
- PLC/MCC automation keeps each product repeatable.
Custom shapes and OEM/ODM
- Output, die, screw, heating method and recipe built to order.
- OEM and ODM service, with 30+ OEM partners.
- Run fried chips and 2D pellets on one investment.
Product lines
Choose your production line
Meiteng builds 3D papad and pellet lines and frying chips lines, as complete lines or single machines.
Recipe testing
Test your own raw material before you invest
Visit our Shandong plant and run your local flour on our machines, so you see the finished product before signing.
Bring Your Local Flour
Your flour, our workshop
Factory visit and trial run
Cassava
- End product: fried chips and 3D pellets.
- We tune: line setup around your local cassava flour.
- You check: even expansion across the belt.
Wheat
- End product: papad and 2D/3D pellets.
- We tune: die, sheet forming and drying settings.
- You check: shape after frying, no cracks after drying.
Featured machines
3D food machines and frying chips lines
Common standard models are in stock for delivery within 10 days. Custom lines take 30–50 working days.
frying chips machine
Industrial Deep Fryer Machine Manufacturer Banana Potato Chips French Fries
Get a Quote
frying chips machine
Electric Batch Frying Machine for French Fries Fast Food Chicken Wing
Get a Quote
Applications
Lines for snack makers and pellet producers
Meiteng equipment serves snack food plants, fried snack producers, pellet processors and food equipment distributors.
Snack Food Plants
Snack factories and private-label brands use extruders, forming and cutting sections, fryers and seasoning equipment to turn potato, cassava or wheat into shaped, ready-to-pack…
Fried Snacks & Chips
Fryers, de-oiling units and seasoning equipment finish potato chips, French fries, banana chips and expanded pellet snacks, either as batch kettles or within a…
Snack Pellet Processing
Pellet and papad producers use twin-screw extruders, sheet forming, cutting and multi-stage drying to make 2D and 3D half-products from starch-based doughs for later…
Factory proof and field service
Proven on our floor, commissioned on yours
Every line runs end to end before it ships, then our engineers install it and train your operators on site.
Full-line trial run
Tested in our whole-machine workshop. Third-party inspection can be arranged.
CE and ISO 9001:2015
CE under Machinery Directive 2006/42/EC. Food-grade stainless steel on contact parts.
Engineers on site
Installation, commissioning and operator training at your plant.
12-month warranty
Spare parts at cost with priority dispatch, supplied for 10+ years. Lifetime remote support.
- Founded
- 2013
- Production base
- 20,000 m²
- Countries served
- 60+
- Production lines
- 1,000+
- Global customers
- 500+
- OEM partners
- 30+
Customer results by country
Snack producers report even expansion, lower oil and lines that run
South Asia and Middle East
Bangladesh
"Drying was our biggest loss - pellets cracked after two weeks in the warehouse. With the multi-stage dryer, breakage dropped to almost none."
Shahidul AlamProduction Manager, Dhaka Snack FoodsPakistan
"Over 200 shapes from the die set, and the 3D pellet keeps its shape through frying without curling."
Imran SheikhFactory Manager, Lahore Snack MillsSaudi Arabia
"Their engineer came for commissioning, trained our staff and left only after the line hit the agreed output."
Saleh Al-GhamdiPlant Manager, Jeddah Food IndustriesSoutheast Asia
Indonesia
"They configured the line around our local cassava flour, not a generic recipe, and expansion is even across the whole belt."
Rizky HidayatOperations Manager, Hidayat SnacksVietnam
"Starch-based 2D pellets were our only product; now we also run fried chips on the same line. One investment instead of two."
Nguyen Van DucOwner, Duc SnackThailand
"Two years later the die and screw are still in tolerance, and spare dies arrive at cost within a week."
Prasert ChaiyapornChief Engineer, Chaiyaporn FoodsAfrica and Latin America
Egypt
"Potato and cassava based chips at six points lower oil content than our old fryer line, thanks to the de-oiling section."
Mostafa HassanTechnical Director, Cairo Snack Co.Nigeria
"We bought a single machine first and later added the fryer and seasoning from the same factory, so every section lines up."
Chinedu ObiManaging Director, Obi Snack FoodsBrazil
"Food-grade stainless and CE paperwork were in order, so customs clearance took days, not weeks."
Felipe BarbosaImport Manager, Barbosa AlimentosFAQ
Questions from food technologists and buyers
Can your 3D food machine run on our local flour?
Yes, our lines process potato, cassava and wheat raw materials. You can visit the factory and run a trial with your own flour. Recipe testing is available, and screw combination, die and heating are set to your material.
How long is delivery for a papad or pellet line?
Common standard models are in stock and deliver within 10 days. Custom solutions take 30–50 working days. We also help arrange export logistics.
Which payment terms do you accept?
We accept T/T, L/C (usually at sight) and Alibaba Trade Assurance. PayPal suits small orders and Western Union suits sample orders. D/P and D/A are considered for long-term customers with good credit.
What documents come with the shipment?
Each shipment includes the CE certificate, packing list, invoice and customs documents. A third-party inspection report can be arranged. Machines ship in export wooden crates with rust and moisture protection.
Latest articles
Guides for planning a 3D food line
Articles for factory owners, food technologists and buyers investing in pellet and fried snack production.
Nov 15, 2026 · Product & Series Guides
DS70 Snack Pellet Line Layout & Output: Manufacturer for Sale
Maximizing DS70 Snack Pellet Line output requires practical spatial layout and realistic machine matching rather than relying on theoretical specifications. Discover how to optimize…
Nov 15, 2026 · Product & Series Guides
Meiteng DS65 Twin-Screw Extruder for 2D/3D Snack Pellets Manufacturer
The Meiteng DS65 Twin-Screw Extruder solves 2D and 3D snack pellet forming challenges through precise mold and parameter matching. Mastering feed moisture, temperature, and…
Nov 15, 2026 · Applications & Industries
Puffed Corn Snacks & Pellet Chips Line Manufacturer Meiteng
Combining puffed corn snacks and pellet chips production line maximizes equipment utilization and reduces initial capital expenditure for startup manufacturers. Real yield depends on…
Start your project
Get your line proposal within 24 hours
Tell Jinan MT Machinery your product, output, raw material, local voltage and heat source. We reply within 24 hours with a free process plan, CAD and 3D plant layout, and an itemised technical quotation.
WhatsApp
+86 186 1542 3372Email
mt@mtmachinery.com